Factory Price For Multipurpose Drainage Catheter - Disposable vacuum blood collection vessel – Zhancheng
Factory Price For Multipurpose Drainage Catheter - Disposable vacuum blood collection vessel – Zhancheng Detail:
Adapted to collection and later separation for flu, Bird flu, Hand-foot and mouth disease, measles etc. It is also adapted to collection and tranport for Chlamydia, Mycoplasma and Ureaplasma specimens.Generally collect specimen from: Oral cavity, throat, nasopharynx, anus etc.
1. Sample collection tube:
Tube body and cap are made by Polypropylene, No deformation after HTHP(121 Celsius, 15min), no embrittlement under low temperature (-196 Celsius). it can bear static extrusion and dynamic impact. Taper bottom design makes it bear centrifugation and shaking. Leakage proof.
2. Sample storage liquid:
According to vast test of the influence to cells among Basic liquid, buffer system, protein stabilizer, freezing protective agent, amino acid,etc.
3. Flocked swab:
Innovative jet embedded nylon technology can improve the efficiency of the sample collection from the patient at the largest degree.The nylon is adhered vertically and uniformly on the surface of swab tip, which can
improve the efficiency of collecting and releasing cells and liquid samples.
Improve analytical sensitivity, No specimen residual and can accelerate the specimen treatment. PS sticker is easy to break off. Adapted to cervix uteri,nasopharynx, oral cavity, Forensic Acquisition System and DNA collecting etc.
4. Product composition:
1) Disposable Sterile flocking nylon swab or polyester fiber swab, one piece.
2) 1-6m liquid(Higher positive rate of PCR test), Two glass beads.16×100mm sealed collection tube, one piece .
3) Biosafety bag, one piece.
4) The swab and collection tube is packed by paper-plastic bag or blister bag,Sterilized by Gamma radiation.
5) 2 years expiry at normal temperature.
|
Name |
Blood tube EDTA-K2/K3 |
|
Specification |
2ml, 5ml |
|
Size |
12×75mm/12×100mm |
|
Material |
Glass/Plastic |
|
Function Introduction |
Clinically used for routine blood examinations such as red blood cells, white blood cells, platelets and various cell analysis |
|
Instructions |
Collect blood to the label scale of the tube body as required. After blood collection, gently invert the blood collection tube 5-6 times to fully mix the additives and blood sample. |
|
Name |
Separation gel coagulant tube |
|
Specification |
3ml, 5ml |
|
Size |
12×75mm/12×100mm |
|
Material |
Glass/Plastic |
|
Function Introduction |
Clinically used in biochemical, immune, serum and other medical tests to obtain high-quality serum samples |
|
Instructions |
Collect blood to the label scale of the tube body as required. After blood collection, gently invert the blood collection tube 5-6 times to mix the coagulant and blood sample thoroughly, and use it after the blood is completely coagulated. |
|
Name |
No additive tube |
|
Specification |
3ml, 5ml |
|
Size |
12×75mm/12×100mm |
|
Material |
Glass/Plastic |
|
Function Introduction |
Clinically used in serum biochemical experiments, liver function, kidney function, blood sugar, blood lipids, serum protein and various enzyme determinations |
|
Instructions |
Collect blood as required to the label scale of the tube body, and use it after the blood is completely coagulated |
|
Name |
Heparin Sodium/Lithium Tube |
|
Specification |
3ml, 5ml |
|
Size |
12×75mm/12×100mm |
|
Material |
Glass/Plastic |
|
Function Introduction |
Clinically used in emergency biochemical tests, glycosylated hemoglobin and hemorheology testing |
|
Instructions |
Collect blood to the label scale of the tube body as required. After blood collection, gently invert the blood collection tube 5-6 times to fully mix the additives and blood sample. |
|
Name |
Sodium citrate 9:1 |
|
Specification |
2ml |
|
Size |
12×75mm |
|
Material |
Glass/Plastic |
|
Function Introduction |
Clinically used to test blood coagulation mechanism (PT, APTT, coagulation factor) |
|
Instructions |
Collect blood to the label scale of the tube body as required. After blood collection, gently invert the blood collection tube 5-6 times to fully mix the additives and blood sample. |
|
Name |
Sodium citrate 4:1 |
|
Specification |
2ml, 1.6ml |
|
Size |
12×75mm/8×120mm |
|
Material |
Glass/Plastic |
|
Function Introduction |
Clinically used for the determination of blood cell sedimentation rate |
|
Instructions |
Collect blood to the label scale of the tube body as required. After blood collection, gently invert the blood collection tube 5-6 times to fully mix the additives and blood sample. |
Product detail pictures:
Related Product Guide:
We will constantly satisfy our respected customers with our good excellent, superior value and superior assistance due to we're additional experienced and far more hard-working and do it in cost-effective way for Factory Price For Multipurpose Drainage Catheter - Disposable vacuum blood collection vessel – Zhancheng , The product will supply to all over the world, such as: Albania, Curacao, Belarus, The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.
By Marcia from Costa Rica - 2017.03.28 12:22
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By John biddlestone from Porto - 2017.02.28 14:19
