Newly Arrival Jejunostomy Catheter - Disposable vacuum blood collection vessel – Zhancheng
Newly Arrival Jejunostomy Catheter - Disposable vacuum blood collection vessel – Zhancheng Detail:
Adapted to collection and later separation for flu, Bird flu, Hand-foot and mouth disease, measles etc. It is also adapted to collection and tranport for Chlamydia, Mycoplasma and Ureaplasma specimens.Generally collect specimen from: Oral cavity, throat, nasopharynx, anus etc.
1. Sample collection tube:
Tube body and cap are made by Polypropylene, No deformation after HTHP(121 Celsius, 15min), no embrittlement under low temperature (-196 Celsius). it can bear static extrusion and dynamic impact. Taper bottom design makes it bear centrifugation and shaking. Leakage proof.
2. Sample storage liquid:
According to vast test of the influence to cells among Basic liquid, buffer system, protein stabilizer, freezing protective agent, amino acid,etc.
3. Flocked swab:
Innovative jet embedded nylon technology can improve the efficiency of the sample collection from the patient at the largest degree.The nylon is adhered vertically and uniformly on the surface of swab tip, which can
improve the efficiency of collecting and releasing cells and liquid samples.
Improve analytical sensitivity, No specimen residual and can accelerate the specimen treatment. PS sticker is easy to break off. Adapted to cervix uteri,nasopharynx, oral cavity, Forensic Acquisition System and DNA collecting etc.
4. Product composition:
1) Disposable Sterile flocking nylon swab or polyester fiber swab, one piece.
2) 1-6m liquid(Higher positive rate of PCR test), Two glass beads.16×100mm sealed collection tube, one piece .
3) Biosafety bag, one piece.
4) The swab and collection tube is packed by paper-plastic bag or blister bag,Sterilized by Gamma radiation.
5) 2 years expiry at normal temperature.
Name |
Blood tube EDTA-K2/K3 |
Specification |
2ml, 5ml |
Size |
12×75mm/12×100mm |
Material |
Glass/Plastic |
Function Introduction |
Clinically used for routine blood examinations such as red blood cells, white blood cells, platelets and various cell analysis |
Instructions |
Collect blood to the label scale of the tube body as required. After blood collection, gently invert the blood collection tube 5-6 times to fully mix the additives and blood sample. |
Name |
Separation gel coagulant tube |
Specification |
3ml, 5ml |
Size |
12×75mm/12×100mm |
Material |
Glass/Plastic |
Function Introduction |
Clinically used in biochemical, immune, serum and other medical tests to obtain high-quality serum samples |
Instructions |
Collect blood to the label scale of the tube body as required. After blood collection, gently invert the blood collection tube 5-6 times to mix the coagulant and blood sample thoroughly, and use it after the blood is completely coagulated. |
Name |
No additive tube |
Specification |
3ml, 5ml |
Size |
12×75mm/12×100mm |
Material |
Glass/Plastic |
Function Introduction |
Clinically used in serum biochemical experiments, liver function, kidney function, blood sugar, blood lipids, serum protein and various enzyme determinations |
Instructions |
Collect blood as required to the label scale of the tube body, and use it after the blood is completely coagulated |
Name |
Heparin Sodium/Lithium Tube |
Specification |
3ml, 5ml |
Size |
12×75mm/12×100mm |
Material |
Glass/Plastic |
Function Introduction |
Clinically used in emergency biochemical tests, glycosylated hemoglobin and hemorheology testing |
Instructions |
Collect blood to the label scale of the tube body as required. After blood collection, gently invert the blood collection tube 5-6 times to fully mix the additives and blood sample. |
Name |
Sodium citrate 9:1 |
Specification |
2ml |
Size |
12×75mm |
Material |
Glass/Plastic |
Function Introduction |
Clinically used to test blood coagulation mechanism (PT, APTT, coagulation factor) |
Instructions |
Collect blood to the label scale of the tube body as required. After blood collection, gently invert the blood collection tube 5-6 times to fully mix the additives and blood sample. |
Name |
Sodium citrate 4:1 |
Specification |
2ml, 1.6ml |
Size |
12×75mm/8×120mm |
Material |
Glass/Plastic |
Function Introduction |
Clinically used for the determination of blood cell sedimentation rate |
Instructions |
Collect blood to the label scale of the tube body as required. After blood collection, gently invert the blood collection tube 5-6 times to fully mix the additives and blood sample. |
Product detail pictures:
Related Product Guide:
We believe that prolonged time period partnership is really a result of top of the range, benefit added provider, prosperous knowledge and personal contact for Newly Arrival Jejunostomy Catheter - Disposable vacuum blood collection vessel – Zhancheng , The product will supply to all over the world, such as: Manila, Afghanistan, India, Our company upholds the spirit of "innovation, harmony, team work and sharing, trails, pragmatic progress". Give us a chance and we will prove our capability. With your kind help, we believe that we can create a bright future with you together.
By Flora from Detroit - 2017.04.08 14:55
Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
By Danny from Barcelona - 2017.11.11 11:41